PQ-24

Specifications

The PQ-24 gear pump is ultra-compact, economical, versatile, chemically resistant, and performs impressively compared to larger, more expensive gear pumps. It is powered by a DC motor.
Inlet Requirements	Flooded inlet
Fluid Types	Mobile and/or Non-abrasive
Dry Run Capability	no
Submersible?	no
Maximum Pressure	20 PSIG (or 12 PSIG with optional AC adapter)
Maximum Flow Rate	2200 ml per min
Fluid Temperatures Supported	Maximum of 180 degrees F
Mounting Requirements	Horizontal orientation
Primary Power Source	24V
Alternate Power Source	Two AC to DC converters are available. Single Speed Power Pack 1 (generates 9V DC) Variable Speed Power Pack 2 (generates 3, 4.5, 6, 7.5, 9 or 12V DC) Both are listed in the section below titled Additional Parts for Purchase
Variable Flow Rate?	Enabled with the Variable Speed Power Pack 2
Dimensions (in inches)	1 1/2" W x 3 1/2" D x 2" H
Weight	10 oz.
Inlet/Outlet Fitting Diameter	³⁄₁₆ inch MHB (male hose barb)
Other Features	Materials that come into contact with the pumped liquid are Molded Delrin pump body Delrin gears Stainless steel motor shaft Teflon diaphragm Elastomer lip seal Elastomer lip seals come in Buna-N, AFLAS, EPDM, and Viton. Gears available in HDPE for corrosive chemicals. UL Certified Available in none, 2-holes, and 4-holes. Hole dimensions are here.